Nickel-Cadmium is a battery that uses nickel oxide in its positive electrode (cathode), a cadmium compound in its negative electrode (anode), and potassium hydroxide solution in its electrolyte. The Nickel Cadmium Battery is rechargeable, so you can use it over and over.

Lithium-ion is a high energy density, 3.6V battery that is widely used in the portable equipment market. It uses lithium metallic oxide in its positive electrode (cathode) and carbon material in its negative electrode (anode), and the lithium ions inside the battery transfer between the positive electrode and the negative electrode during charge or discharge.

ITwicell Nickel-Metal Hydride is a secondary battery which lasts more than twice as long as CADNICA batteries. Twicell uses hydrogen absorbing alloys in its negative electrode (anode) and nickel oxide in its positive electrode (cathode). Since its release, the first in the world in October 1990, the "Twicell" sealed Nickel-Metal Hydride battery has developed a strong reputation for high capacity, high performance and high quality.

Lithium Battery is a battery that uses lithium metal or a lithium aluminum alloy in its negative electrode (anode) and manganese dioxide in its positive electrode (cathode). These batteries meet market needs with their high technology and superior quality.

• A new, better technology for a Tantalum Capacitor.
• A better surface mount alternative to standard Tantalum Technology.
• A proven technology now in production (Production capacity is available)

• Safer than a standard Tantalum capacitor, especially in the short circuit mode.
• Low impedance and low ESR at high frequency.
• Lower ESR than most Tantalums. (40 milliohm in the D4 case size)
• High ripple current capacity. (up to 3000 milliamps)
• Temperature rating: -55°C to + 105°C Voltage rating up to 16 volts. (OK to operate at 90% of rated voltage if rated voltage is 10 volts or less, 80% if rated voltage is above 10 volts)
• Low profile chip capacitor. (1.9 mm in the TPC series)
• Reflow soldering method available.
• TPA/TPB series, the anode is sintered tantalum.
• TPC series, the anode is sintered tantalum, 1.9 mm height.
• The cathode in all series is a highly conductive Polymerized Organic Semiconductor.
• The POSCAP is an ideal chip capacitor especially for digital, high frequency devices.

OS-CON is a small size high capacitance electrolytic capacitor unlike other electrolytics. While the rest uses eletrolytic solution and manganese dioxide as eletrolyte, OS-CON uses a high conductivity polymerized organic semiconductor.

With polymerized organic semiconductor, OS-CON can easily achieve higher reliability, higher heat resistance, higher conductivity (low resistance value), lower Equivalent Series Resistance (ESR), larger capacitance and longer life than the rest on the market.